Crest Electronics CDVS-4100 Series Instruções de Operação descarregar pdf (Página 13)

3-1

Powering Up e DVR For e First Time

e default settings of the 4100 series DVR will allow the DVR to begin recording in continuous mode aer

all the hardware has been installed and the unit is powered on. e steps below will walk you through setting

the date and time for your unit.

Aer making all connections to the DVR, turn on the DVR by pushing the on/oﬀ button located on the front

panel of the DVR. e system will go through a series of self diagnostics aer which, will bring up the main

screen. If you have not connected cameras to all the ports, you will receive a loss signal warning. Click OK to

move past the warning screen. See image below.

Click Yes to remove message from screen

Default User Name and Password

Click the right mouse button or press the menu button on the front panel or remote controller. is will

bring up the log in screen. e system default user is administrator and the password is 1234. Use the mouse

to click the password 1 2 3 4 and click OK. See image below.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 66 67

Sem comentários

Crest Electronics CDVS-4100 Series Instruções de Operação Página 13